DigiFab Meeting 17/09/2019 8:15PM

DigiFab Meeting 17/09/2019 8:15PM

Time: 8:15 pm
After General meeting
Date 17/09/2019

If you know you will be unable to attend the meeting, please send
through the following proxy form before the meeting to
secretary@hsbne.org

HSBNE Inc:

I, of (insert address), being a member of the association, appoint
(insert name) of (insert address) as my proxy to vote for me on my
behalf at the Digifab Cause meeting of the association, to be held on
the day of (date) and at any adjournment of the meeting.
Signed this day of (date).

(Signature)

Agenda:
Purchase of the following


but changing it over to Raspberry Pi 4
3 x Raspberry Pi 4 https://core-electronics.com.au/raspberry-pi-4-model-b-1gb.html $171
3 x PSU https://core-electronics.com.au/raspberry-pi-4-official-power-supply-usb-c-5v-15w-black.html $45
3 x Case https://core-electronics.com.au/raspberry-pi-4-case-red-white.html $37.5
$253.35 + $12.15 for shipping
Total $265.50

as well as the following policy changes

please feel free to add agenda items

I’d like to propose a budget of $200 to replace the ageing and furry shelf next to the laser cutter with this racking set:
https://www.bunnings.com.au/rack-it-400kg-900mm-wide-x-530mm-deep-mdf-shelving_bbundle0360

This will then take full use of the space in the corner and means we can fit the sheets of precut acrylic side-by-side.

Also to go alongside with the Pi 4 upgrade the sd cards in our existing Pis are old and potentially dying. I’d like to ask for a budget of $30 to buy 3 new microsd cards that will work in the existing pis and also in the new ones.