Thank You

theban · 16 February 2016 06:54

Thank you to @Thermoelectric for moving a big pile of dirt and relocating the air compressor into a more suitable home.

nog3 · 17 March 2016 12:13

Thank you to @togusa09 for bringing us sugar and caffiene at the WSF stall on Saturday.

Thank you to @pelrun for literally being a wizard in general.

Thank you to @Thermoelectric for being a literally wizard also, I’m constantly coming in and finding little things he’s done that improve the space.

Thank you to @sjpiper145 for doing the work on WSF and the message expunged

riumplus · 18 March 2016 13:34

I’d like to say thanks to @nogthree for sorting out the forum upgrade. Things are finally looking newer & shinier around here!

Pelrun · 18 March 2016 16:29

Seconding the thanks for @nogthree. Also thanks to @riumplus for putting Dr Pepper (and the other new flavours) in the vending machine, I’m a little addicted to the stuff.

nog3 · 28 March 2016 01:41

I’d like to thank @pelrun for helping (though he did all the hard uncomfortable work) getting the front off of the $2 vending machine on tuesday. There was lots of awkward angles and a bit of swearing but he soldiered on.

Also thank you @Thermoelectric for implementing the change exchange.

And last but by no means least @riumplus for his constant work with the drinks machines and keeping them stocked.

Pelrun · 15 April 2016 18:22

Thanks to the guy (I didn’t get your name, sorry) who cleaned up the machine shop this evening. I only just noticed when I went to put some stuff away, and the floor is swept clean and the mess around the gigantoprinter has been significantly sorted out. It is a major improvement - good work!

riumplus · 5 May 2016 15:03

Thank you to whomever I have to thank for the state of the Green Room. I just finished wiping down every surface I could reach, and it felt like I haven’t been able to reach some of these surfaces in a year or longer. It now looks and feels SO much nicer and helps keep me in the zone of hacking longer

Pelrun · 9 May 2016 19:22

Thanks to @sjpiper145 for the work improving the hipster lounge; the combination bench-seat/library is aces. (just don’t sit on it yet, the black paint comes off! Don’t think it likes the linseed oil.)

nog3 · 10 May 2016 23:50

Thank you to @Thermoelectric for making the second drinks machine light up. Vigo looks much more menacing now.

Svenska · 22 May 2016 10:24

Thanks to @pelrun for his continuous effort helping me make HULK go!

Pelrun · 5 June 2016 07:02

Thanks to @sjpiper145 for almost singlehandedly cleaning up the boneyard (I helped a little bit). There’s a long way to go, but it’s possible to actually find stuff in there now.

iHally · 17 July 2016 05:29

Thank you to ALL the members who cleaned up after themselves and others, the green room was Amazingly Clean! Excellent member behaviour!

Having such a well looked after and equipped electronics bench is phenomenal. Thanks @merseyless

nog3 · 12 October 2016 21:43

I want to send a big shout out to @caffeine_addict who was in on Tuesday to check out the Okada VMS and helped me cut ABS sheets for the vacuformer on the table saw and guillotine.

He did this, even though he wasn’t a member and that is boss. Thank you Andrew.

nog3 · 21 February 2017 11:37

This post doesn’t get used half as often as I’d like, but I feel like I forgot a thank-you at tonight’s meeting.

I’d like to thank @devians for all the work he has put into the previous iterations of our website. There has been A LOT of work that many people won’t notice because it’s back-end or code and I want to make sure that people are aware that without his work our website would still be that awful google pages thing that we used to use.

devians · 1 March 2017 02:47

Thank you to @rut4ger for doing some maintenance on the lathe and just generally improving it.

nog3 · 26 April 2017 01:04

Thank you to @Svenska for CNCing up a new cover for the external RFID readers on the fly.

Thank you to @pelrun for debugging the door reader code so the netrols now support the new door readers.

riumplus · 26 April 2017 03:44

Thank you to @Boo, @doc, @crofty, @sjpiper145, @nogthree, @Wixted, @pelrun, and myself for making the Supanova Gold Coast booth happen. We raised a decent amount of money for the Space & our outreach efforts went pretty well. This Tuesday was a bit quiet because it was a public holiday but even still we had more than the average number of newcomers show up, plus our Facebook likes & website traffic are both up, so I’m expecting more newcomers than usual over the coming weeks too!

nog3 · 7 May 2017 11:41

I’d like to thank @Doxle for taking the time to fix up some of the chisels in the wood shop and making this kicking rad box to store them in so nobody would hurt themselves on them.

nog3 · 10 June 2017 08:14

I’d like to thank the members who made the first screen-printing workshop today such a success. This was @Boo, @andrew1973 and @riumplus, I was only there as an observer but it looked like it went well, even with first workshop teething issues

nog3 · 16 June 2017 08:03

I want to give a shout-out to @doc for stepping in and helping with inductions in the last month.

@buzz for working on some access system lifecycle improvements (We don’t have to copy and paste contacts into Xero now yay).